• Poorboy’s SuperHydrophobic Ceramic Coating Poorboy's World Made In USA - 1
Poorboy’s SuperHydrophobic Ceramic Coating Poorboy's World Made In USA - 1
  • Out-of-Stock
Poorboy’s SuperHydrophobic Ceramic Coating Poorboy's World Made In USA - 1

Poorboy’s SuperHydrophobic Ceramic Coating

  • Out-of-Stock
  • Poorboy's World Made In USA
  • ceramic-coating
Add to wishlist

Guaranteed safe checkout

Poorboy’s SuperHydrophobic Ceramic Coating is easy to apply the nano-ceramic coating.

It can be used on smooth surfaces that include clearcoat, glass, plastic and chrome.

This state-of-the-art formula features SIO2 nano-particles suspended in a rugged, yet flexible thermoplastic resin that bonds to the surface to form a resilient ceramic layer.

Just as the name implies, SuperHydrophobic Ceramic Coating provides superior water repellency with high contact angle water beading. Surfaces coated with SuperHydrophobic Ceramic Coating are scratch, wear and chemical resistant with protection that lasts up to 3 years.

With an extremely high gloss finish, superior protection and easy to use the application, Poorboy’s World SuperHydrophobic Ceramic Coating bridges the gap between consumer and professional ceramic coatings.


Ensure that surface is clean, dry, smooth and free of contaminants before application. If the surface has bonded contaminants, use a detailing clay bar or clay mitt along with clay lubricant to remove. Removal of swirls and scratches is also recommended prior to application of SuperHydrophobic Ceramic Coating. Wipe the surface with Poorboy’s World Surface Prep Spray to remove any residual polishing oils or traces of surfactants.

Shake well before use.

Wrap a suede towel around applicator block and apply a few drops of Ceramic Coating onto the towel.

Focus on a 3’ x 3’section, apply a coating to the surface in straight lines with overlapping passes.

The first side to side, then front to back. Glide a second, dry suede towel along the finish to ensure a level surface.

Gently buff the surface with a soft microfibre towel, carefully inspect the finish and enjoy the results before moving to the next section. Second layer may be applied after 20 minutes.

Avoid exposure to moisture for 12 hours and allow 48 hours before washing.

Maintain the finish with regular washing and detail spray to remove water spots, increase surface gloss and reduce the sliding angle for maximum water repellency. Avoid tunnel car washes that use brushes.


When applied to a clean, smooth surface that is free of contaminates AND the surface is maintained well with gentle washing, user can expect UP TO 36 months of protection from the elements.


1 Layer – .5 – .75 μm (micrometer)

2 layers – 1 – 1.5 μm (micrometre)




Dries in 20 minutes. Full cure in 48 to 72 hours.


One 30ml kit is usually enough for applying SuperHydrophobic Ceramic Coating to the paint on most average size vehicles, with enough left for an additional layer of coating on the front portion of the vehicle and the hood. When skillfully applied, some professionals may be able to get even more coverage by avoided overapplication.

Please note that the coverage area is entirely dependent on a user applying correctly and not applying too much product to the applicator, resulting in wasted product. Remember, less is more effective when applying coatings. 


Not applicable and 100% dependent on the substrate that coating is applied to. Poorboy's World SuperHydrophobic is an elastomeric flexible coating, Not hard or brittle.


Petroleum Distillates, Proprietary Blend Consisting of Thermoplastic Resin and SIO2 Nano Particles 


Follow the directions from the beginning to ensure the coating is clean, smooth and free of contaminants and reapply. Please note that SuperHydrophobic coating does not need to be removed prior to adding additional layers. Vehicles that are outside 24/7 should be decontaminated and inspected more often.


SuperHydrophobic Ceramic Coating is removable by abrasion. Machine polishing with a medium to heavy cut polish is recommended if the coating needs to be removed.

Poorboy’s World SuperHydrophobic Ceramic Coating Kit Includes:

1 – 30ml bottle SuperHydrophobic Ceramic Coating

1 – Microfibre Applicator

2 – Suede Microfibre Towels

1 – Microfibre Towel

Additional information





Best coating I've used

This is amazing. Have used many coatings including some that are much more expensive. This is the easiest to apply and also gives best results! Extreme shine and after more than a year still looks awesome. Only problem is out of stock, had to use Soft99 for my other car and didn't like as much.

Write your review

Poorboy’s SuperHydrophobic Ceramic Coating

  • Easy to apply nano-ceramic coating
  • Lasts up to 36 months
  • Provides superior water repellency
  • SuperHydrophobic Ceramic Coating Kit is for smooth surfaces that include for paint, glass, smooth plastic, chrome and wheels.

Write your review