Grit Guard 26 cm
Available only in red colour.
Protect your paint from swirls caused by contaminated car wash water with the Grit Guard Insert.
Most paint swirls are caused by improper detailing techniques. For example, when you wash your vehicle, dirt and sand get trapped in the sponge or mitt.
The first time you re-wet your sponge in the bucket, some of the abrasive particles will come off the sponge into the water. Subsequent dips in the bucket will re-contaminate your sponge. These contaminants will then rub against your paint and produce swirls.
To get those particles out of your sponge or mitt, you need the Grit Guard Insert. The raised radial surface fits in the bottom of any 5-gallon bucket and extracts grit from your wash mitt or sponge when you drag it across the Grit Guard Insert.
The dirt settles at the bottom of the bucket so your car wash water stays clean. The Grit Guard Insert has a radial grid surface that scrapes dirt out of your mitt or sponge. Four quadrants at the base of the Grit Guard Insert calm the wash water and hold the grid above the bottom of the bucket.
Dirt falls to the bottom and stays there. You'll be amazed at how much dirt accumulates in the bottom of your wash bucket!
The Grit Guard Insert is a real paint-saver. But it has a number of other uses, too. Use it to clean paint brushes by running the bristles across the grid in a bucket of water or paint thinner. Clean automotive parts or drain your oil filter. You can even use the four quadrants as a grid when laying tile.
The Grit Guard Insert takes the grit out of your mitt for safer, swirl-free washing. This inexpensive item can save you countless hours and dollars spent removing swirls.
Can Effectively Isolate Sand And Stone During The Process Of Car Washing, And Keep The Water Quality Clean.New Environmental Protection Pp Material, High Impact Resistance, Strength And Toughness, Acid Alkali Resistance, Anti-Corrosion.
With 192 holes, you can easily filter sand and gravel without worrying about clogging.