Sanding Blocks

NAT Dual-Surface Sanding Block – Flat Panels and Profiles

Two working surfaces in one block. A characteristic feature of this sanding block is its two working surfaces: white and black. The white surface is used for fast, simple surface treatment and is characterised by high hardness and very low compressibility. The black surface is used for sanding delicate arches, cavities and all profile elements.

Stays clean, works longer. The material used to manufacture the sanding blocks has a very low surface tension. It prevents paint particles from sticking to the surface, making cleaning easier and keeping the block looking good, so its productivity is much greater than that of similar products. For single-hardness blocks, see the Black Hard, Blue Middle and Yellow Middle Soft blocks. For machine sanding, see our Interface Pads.

How to Use

1. Fit your sandpaper to the block.
2. Use the white side for fast, flat sanding of larger areas.
3. Turn to the black side for arches, cavities and profiled elements.

Pro tip: wipe the block clean between grits to avoid carrying coarse particles into the finer stage.

Specifications

• Sizes: 140 × 75 × 33mm, 200 × 75 × 33mm or 290 × 75 × 33mm
• Surfaces: white (hard, low compressibility) and black (for profiles)
• Low surface tension material – resists paint adhesion
• Brand: NAT, made in Poland

Sand faster and cleaner – order now.