Soft99 Compound Trio - Cutting - Polishing - Finishing

Soft99 Compound Trio – Complete 3-Step Machine Polishing System

Everything you need for full paint correction, from heavy defect removal to a deep, high-gloss finish. The three Soft99 compounds are designed to work together, each one removing the marks left by the step before. Save $11.98 compared with buying all three separately.

What's Inside

- Cutting Compound 300ml – Step 1. Heavy cut for deep scratches, sanding marks (P2000 and finer), orange peel and severe etching.
- Polishing Compound 300ml – Step 2. Medium cut to remove haze and marring from step 1 and restore strong gloss. Also works as a one-step polish on lightly marked paint.
- Finishing Compound 300ml – Step 3. Ultra-fine polish that removes holograms and refines the paint to maximum depth and reflection.

Why Soft99 Compounds

- Finely refined ceramic abrasives cut efficiently without leaving heavy haze
- Anti-clogging, low-dust formula – cleaner pads and an easy wipe-off
- No silicone, waxes, fillers or gloss enhancers – no drop-back, true results, body shop safe
- Suitable for all automotive paints, including high-solid clear coats
- Use all three steps, or just two, depending on paint condition

How to Use

These compounds are designed for machine polishing with a rotary or dual-action polisher.

1. Wash and decontaminate the paint. Work in the shade on cool panels.
2. Step 1 – Cutting Compound on a wool or cutting pad (rotary: around 1800 rpm). Firmer pressure at first, then ease off.
3. Step 2 – Polishing Compound on a polishing foam pad (rotary: around 1500 rpm). Switch to wool if sanding marks remain.
4. Step 3 – Finishing Compound on a soft finishing foam pad (rotary: around 1300 rpm) with light pressure.
5. Work small sections of around 50 × 50 cm, keep an eye on panel temperature, and wipe residue with a clean microfibre between steps.
6. Protect the finish with a wax, sealant or coating.

Specifications

- Contents: 3 × 300ml
- Cutting Compound: pH 8.5–10, viscosity 6–16 Pa·s, particle size 10–12 µm
- Polishing Compound: pH 8.5–10, viscosity 3–6 Pa·s, particle size 3–5 µm
- Made in Japan by Soft99

Shake before use. Do not use on hot surfaces. Protect from frost and excessive heat.