Touch-On Hydrophobic Ceramic Paint Protection Treatment Bilt-Hamber 1 Liter

Bilt Hamber Touch-On 1L – Hydrophobic Ceramic Paint Protection Treatment

Protect while you wash. Touch-On is a durable hydrophobic ceramic paint protection treatment that can be applied by pressure washer, pump spray, trigger or bucket. It also has low-foaming, powerful detergency for most second-stage bucket washes, so you can further clean the paint while simultaneously applying protection after a Touch-Less pre-wash.

Dirt-releasing, contactless results. Once applied, Touch-On has dirt-releasing properties that work together with Touch-Less in subsequent wash routines to produce superior contactless results.

Water-based and solvent-free. Touch-On is water-based, not flammable, and contains no alcohol or petrochemical solvents.

How to Use

The vehicle must be cool and out of direct sunlight. Pre-wash with Touch-Less to remove dirt and contamination from your paintwork. If further cleaning is needed, use Auto-Wash concentrated shampoo and a noodle wash mitt. Then choose one of three methods:

1. Pressure washer. Add 30ml to the washer or lance reservoir and top up to 300ml with clean, cool water. Shake well and apply under pressure to the entire vehicle. Rinse immediately with the pressure washer, then dry with a microfibre cloth or an air blower.
2. Bucket. Pour 30–60ml into a bucket, then fill with 10 litres of warm water (preferably from a fast-running tap) and mix well. Apply with a noodle wash mitt, sponge or similar, rinse with clean water and dry with a microfibre cloth. Please note, this is not a high-foaming bucket wash.
3. Trigger spray. Add 30ml to a trigger bottle and top up to 1 litre with water (preferably demineralised/deionised). Shake well, apply liberally panel by panel, then rinse thoroughly with a pressure washer or hose. Dry with a microfibre cloth or air blower.

Pro tip: never let the car air dry after applying Touch-On, as water spotting may occur.

Specifications

• Size: 1 litre
• Type: hydrophobic ceramic paint protection with low-foam detergency
• Application: pressure washer, pump spray, trigger spray or bucket
• Dosage: 30ml per 300ml (lance), 30–60ml per 10 litres (bucket), 30ml per 1 litre (trigger)
• Formula: water-based, non-flammable, no alcohol or petrochemical solvents
• Brand: Bilt Hamber, made in the UK

Add ceramic protection to every wash – order now.