Touch-On Hydrophobic Ceramic Paint Protection Treatment Bilt-Hamber 1 Liter

Bilt Hamber Touch-On Hydrophobic Ceramic Paint Protection Treatment — 1 Litre | Ceramic Coating NZ

TOUCH-ON is a pressure washer, pump-spray, trigger, or bucket applied durable hydrophobic ceramic paint protection treatment that additionally has low-foaming, powerful detergency for most second stage bucket washes — so that you can further clean the paint while simultaneously applying protection following Touch-Less pre-wash cleaning.

Once applied, TOUCH-ON has dirt releasing properties too that work in conjunction with Touch-Less in subsequent wash routines to produce superior contactless results.

TOUCH-ON is water based, is not flammable nor contains alcohol or petrochemical solvents.

How to use Touch-On — three methods

Vehicle must be cool and out of direct sunlight. Pre-wash with Touch-Less to remove dirt or contamination from your paintwork. If further cleaning is required use Auto-Wash concentrated shampoo and a noodle wash mitt.

Pressure washer:
Add 30ml into washer or lance reservoir, top up to 300ml with clean cool water. Shake well and apply under pressure to entire vehicle. Immediately rinse using pressure washer. Dry vehicle with a microfibre cloth or similar. Alternatively, an air blower can be used.

Bucket:
Pour 30–60ml into a bucket then fill with 10 litres of warm water (preferably from a fast running tap), mix well. Apply using noodle wash mitt, sponge or similar. Rinse with clean water. Dry with a microfibre cloth or similar. Please note, this is not a high foaming bucket wash.

Trigger spray:
Add 30ml to trigger bottle and top up to 1 litre with (preferably demineralised/deionised) water. Shake well. Trigger apply liberally, panel by panel, then thoroughly rinse with pressure washer or hose. Dry with a microfibre cloth or air blower.

Car must not be allowed to air dry as water spotting may occur.

1 Litre